Kizashi AWD L4-2.4L (2010)
6) Install the differential side joint housing to the tripod joint.
7) Fit boot (3) to grooves (2) of shaft and differential side joint housing (1).
8) Insert flat-end screwdriver into boot (2) and allow air to enter boot so that air pressure in boot becomes the same as the atmospheric pressure.
Drive shaft boot fixing position (distance between differential side joint end and small boot band center) "a"
6M/T model (right side drive shaft): 201.2 mm (7.921 in.)
6M/T model (left side drive shaft): 190.6 - 191.1 mm (7.504 - 7.524 in.)
CVT model (right side drive shaft): 201.2 mm (7.921 in.)
CVT model (left side drive shaft): 184.7 mm (7.272 in.)