Kizashi AWD L4-2.4L (2010)
Fluid - M/T: Service and Repair
Manual Transaxle Oil Change
Manual Transaxle Oil Change
1) Hoist vehicle horizontally.
2) Remove left side engine undercover.
3) Remove transaxle oil level / filler plug (2) and gasket.
4) Remove transaxle oil drain plug (1) and gasket, and drain oil.
5) Install transaxle oil drain plug (1) with new gasket, and then tighten it to specified torque.
Tightening torque
Transaxle oil drain plug (a): 35 Nm (3.6 kg-m, 26.0 lbf-ft)
6) Pour new specified oil until a little oil flows from oil level / filler plug hole (3).
NOTE:
It is highly recommended to use "SUZUKI GEAR OIL 75W-80".
Transaxle oil specification
: SUZUKI GEAR OIL 99000-22B21-036
: API GL-4 (For SAE classification, refer to viscosity chart [A] in figure.)
Manual transaxle oil capacity
Reference: 2.5 liters (5.28/4.40 US/Imp. pt.)
7) Install transaxle oil level / filler plug with new gasket, and then tighten it to specified torque.
Tightening torque
Transaxle oil level / filler plug (b): 27 Nm (2.8 kg-m, 20.0 lbf-ft)
