Reno L4-2.0L (2006)
Cruise Control Servo: Service and Repair
Cruise Control Actuator Removal and Installation
Removal
1. Separate the hood release cable from the hood latch release handle.
2. Carefully remove the instrument panel under cover by pulling until the retaining clips are free from the slots in the instrument panel.
3. Remove the knee bolster. Refer to Driver's Side Knee Bolster Removal and Installation.
4. Disconnect the electrical connector from the cruise control actuator.
5. Remove the cruise control actuator mounting bolts.
6. Press the release button on the cable adjuster and push the cable toward the adjuster until the spring is compressed.
7. Tilt the cable housing and insert a flat-blade screwdriver into one of the slots in the actuator.
