Reno L4-2.0L (2006)
1. Install the catalytic converter and the gasket to the exhaust front pipe flange.
Tighten: Tighten the exhaust front pipe-to-catalytic converter nuts to 40 Nm (30 ft. lbs.).
Tighten the exhaust front pipe-to-cylinder block bolt to 50 Nm (37 ft. lbs.).
2. Install the catalytic converter to exhaust manifold nuts and the gasket.
Tighten: Tighten the catalytic converter to exhaust manifold nuts to 40 Nm (30 ft. lbs.).
3. Install the exhaust manifold converter bolts.
Tighten: Tighten the exhaust manifold cover bolts to 15 Nm (11 ft. lbs.).
4. Connect the oxygen sensor electrical connector.
5. Connect the negative battery cable.