Reno L4-2.0L (2006)
Exterior Lighting Module: Service and Repair
Extension Lamps Removal and Installation (For HATCHBACK Model ONLY)
Removal
1. Disconnect the negative battery cable.
2. Open the tailgate.
3. Remove the extension lamp assess cover.
4. Remove the nuts and the extension lamp assembly.
5. Disconnect the electrical connector.
Installation
CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
1. Install the extension lamp assembly with the nuts.
Tighten: Tighten the extension lamp assembly nuts to 3 Nm (27 in. lbs.).
2. Connect the electrical connector.
3. Install the extension lamp access cover.
4. Connect the negative battery cable.
