Reno L4-2.0L (2006)
8. Remove the generator upper mounting bolts to the intake manifold/cylinder head support bracket, the intake manifold strap bracket, and the intake
manifold-to-cylinder body strap bracket.
9. Raise and suitably support the vehicle and remove the nut and washers which hold the generator lower bracket-to-generator bolt. Work the bolt
loose and remove the generator.
10. Remove the generator lower support bracket bolts.
11. Carefully remove the generator with the lower bracket.
12. Remove the generator lower support bracket nut, the bolt, and the washer.
Installation
1. Install the generator to the generator lower bracket and insert the generator bolt.
Tighten: Tighten the generator lower bracket-to-generator nut to 25 Nm (18 ft. lbs.).