Reno L4-2.0L (2006)
Control Arm Bushing: Service and Repair
Control Arm Bushings Disassembly and Assembly
Tools Required:
DW320-020 Remover/Installer
KM-158 Remover/Installer
Disassembly
1. Remove the control arm.
2. Remove the split sleeves from the rear control arm bushing.
3. Press off the control arm rear damping bushing using a press and the remover/installer KM158.
Assembly
1. Press the control arm rear damping bushing into the control arm using a press and the remover/installer KM-158.
2. Install the split sleeves into the rear control arm bushing.