Reno L4-2.0L (2006)
2.
Drain and remove the oil pan from the side of the transmission according to the directions in the Forenza Service Manual (Oil Pan, Oil Pan Gasket
Removal and Installation).
3.
Inspect the transmission fluid in the pan for an abnormal amount of metallic gray particulate, or burnt transmission fluid.
4.
Smell the fluid looking for the strong odor of burnt transmission fluid.
5.
If either an abnormal amount metallic particulate, or the strong odor of burnt transmission fluid is found, DO NOT CONTINUE. Replace
transmission assembly.
6.
If these symptoms are not present, continue with the following repair. Temporarily reinstall the oil pan before removal of the transmission from the
vehicle.
Transmission repair procedure:
1.
Remove the transmission assembly according to the instructions in the Forenza service manual (Transaxle Assembly Removal and Installation).
2.
Place transmission on a clean work bench.
3.
Remove the oil pan from the transmission.
4.
Use a T27 torx bit tool to remove the speed sensor.
5.
Remove the valve body from the transmission by removing the 7 indicated bolts that attach the valve body to the transmission. Do not loosen or
