Reno L4-2.0L (2006)
11.
Wrap the harness and hose up to the opening where the harness goes into the door. Then slide the hose and harness through the opening from
which the harness was removed. The harness may get caught on the hinge bolts inside the door. It may take some insertion angle changes of the
harness to over come the hinge bolts.
12.
Connect the hose to the washer nozzle.
13.
Attach the harness and hose to the grommet tongue with electrical tape.
14.
Insert both ends of the grommet into the body and door open.
15.
Re-tape the hose to the harness inside the vehicle. It may be necessary to lower a section of the roof lining for access.
16.
Re-connect the washer hose at the "C" pillar.
