Reno L4-2.0L (2006)
Windshield Washer Pump: Service and Repair
Windshield Washer Pump(s) Removal and Installation
Removal
1. Disconnect the negative battery cable.
2. Remove the front left wheel. Refer to Wheel Removal and Installation.
3. Remove the bolts and the screws and the front wheel well splash shield.
4. Disconnect the electrical connector.
5. Disconnect the washer hose from the washer pump.
6. Remove the washer pump.
Installation
1. Install the washer pump.
2. Connect the washer hose to the washer pump.
3. Connect the electrical connector.
4. Install the front wheel well splash shield with the bolts and the screws.
Tighten: Tighten the front wheel well splash shield bolts to 1.5 Nm (13 in. lbs.).
5. Install the front left wheel. Refer to Wheel Removal and Installation.
6. Connect the negative battery cable.
