Samurai 4WD L4-1324cc 1.3L SOHC 5 Carb 8V (1986)
Vacuum Brake Booster: Service and Repair
Fig. 7 Exploded view of booster assembly
1.
Remove master cylinder from booster as described in ``Master Cylinder, Replace.''
2.
Disconnect pushrod clevis from brake pedal arm, Fig. 7.
3.
Disconnect vacuum hose from booster.
4.
Remove booster attaching nuts, then booster assembly.
5.
Refer to ``Master Cylinder, Replace'' for adjustment procedure of the booster piston rod to master cylinder piston.
6.
Reverse procedure to install. Torque booster nuts to 7.5-11.5 ft. lbs.
