suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Sensors and Switches > < Torque Converter Clutch Relay|Specifications|Page 106
Page 1
background image

Torque Converter Clutch Relay: Testing and Inspection

1) Remove TCC relay with ignition switch OFF.

2) Check resistance between each two terminals.

RESISTANCE 

Between terminals 2 and 4 : Infinity
Between terminals 1 and 3 : 90 - 110 Ohms.

If check results are as specified above, proceed to next operation check, if not replace.

3) Check that there is continuity between terminals 2 and 4 when battery is connected to terminals 1 and 3. If found defective, replace.
4) Install relay and connect its coupler securely.

Sensors and Switches > < Torque Converter Clutch Relay|Specifications|Page 106