Sidekick 2WD L4-1590cc 1.6L SOHC 0 TBI 8V (1992)
Ignitor: Testing and Inspection
Ignitor Location
-
Remove power unit from ignition coil bracket.
-
Connect 2 new 1.5V in series (total voltage must be 3 VDC).
Inspecting Ignitor Operation
-
Connect positive lead of analog ohmmeter to "G" terminal of power unit.
-
Connect negative lead of analog ohmmeter to "OC" terminal of power unit.
-
Connect positive side side of battery source to "IB" terminal of power unit.
-
Confirm that continuity exists between "G" and "OC" terminals when the negative circuit is supplied to "G" terminal of power unit.
-
Coinfirm that continuity does not exist when power is removed.
-
Replace power unit if it fails test.