suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Alignment|Specifications|Page 324 > < Transmission Position Switch/Sensor, A/T|Description and Operation
Page 1
background image

Alignment: Specifications

Caster Angle, Degrees:

Limits ....................................................................................................................................................................................................... +1/2 to 2 1/2 
Desired ..............................................................................................................................................................................................................  +1 1/2 

Camber Angles, Degrees:

Limits ...................................................................................................................................................................................................... -1/2 to +1 1/2
Desired ................................................................................................................................................................................................................... +1/2

Toe, Inch [01] .................................................................................................................................................................................................  +0.08 to +0.24
Kingpin Inclination, Degrees:

Limits ....................................................................................................................................................................................................................  N/A
Desired ..................................................................................................................................................................................................................  N/A

Ball Joint Wear ................................................................................................................................................................................................................. [02]

[01] -- Toe-in (+); toe-out (-).
[02] -- Refer to Ball Joint, Lower for inspection procedure.

Alignment|Specifications|Page 324 > < Transmission Position Switch/Sensor, A/T|Description and Operation