Sidekick 4 Door 4WD L4-1.8L DOHC MFI 16V (1996)
Fuel Pump Relay: Testing and Inspection
NOTE:
Distinguish between main relay and fuel pump relay by wire colors.
1. Disconnect negative cable at battery.
2. Remove fuel pump relay from its bracket after disconnecting its coupler.
3. Check resistance between each two terminals as in above image.
If check results are as specified, proceed to next operation check. If not, replace.
4. Check that there is continuity between terminals "A" and "B" when battery is connected to terminals "C" and "D".
If found defective, replace.
5. Install relay and connect its coupler securely.
