Sidekick 4 Door 4WD L4-1.8L DOHC MFI 16V (1996)
Power Steering Pump: Service and Repair
Unit Overhaul
1. Remove power steering pump as outlined under Removal and Installation.
2. Using transfer flange lock holder tool No. 09930-0.0113, or equivalent, remove pump pulley.
Fig. 5 Exploded View Of Power Steering Pump
3. Remove suction connector bolts, then the pressure switch and flow control assembly, Fig. 5.
4. Remove pump cover bolts, then the cam ring.
5. Remove snap ring and pull out rotor. When pulling rotor out of shaft, be careful not to lose vanes.
6. Remove shaft and oil seal.
7. Reverse procedure to install, ensuring rotor is installed to shaft with splined part chamfered side facing cover.