Sidekick 4 Door 4WD L4-1.8L DOHC MFI 16V (1996)
Stabilizer Bar: Service and Repair
1. Raise and support vehicle.
Fig. 17 Stabilizer Bar Replacement
2. Disconnect stabilizer ball joint from front suspension arms, Fig. 16.
3. Remove stabilizer bar mount bushing bracket bolts, then the stabilizer bar.
4. Reverse procedure to install, noting the following:
a. Ensure paint on stabilizer bar aligns with mount bushings for correct side to side Installation.
b. Tighten all bolts and nuts to specification.
