Sidekick 4WD L4-1590cc 1.6L SOHC 0 TBI 8V (1990)
Crankshaft Seal Retainer: Specifications
Oil Seal Housing Bolts (a)....................................................................................................................................................................... 11 Nm (8.0 ft. lbs.)
NOTES:
-
As there are 2 types of housing bolts, refer to figure for their correct use.
-
Do not reuse gasket removed in disassembly. Apply engine oil to oil seal lip before installation. Tighten housing bolts to specification.
-
After installing oil seal housing, gasket edges might bulge out; if so, cut them off to make them flush with cylinder block and oil seal housing.