suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Main Relay (Computer/Fuel System) > < No Start or Hard Start/Engine Flooded When Cold|Page 1078
Page 1
background image

Engine Control Module: Service and Repair

1.

Disconnect battery ground cable.

2.

On Swift, lower junction block after removing its bolts.

3.

Release ECM connector lock while disconnecting ECM connectors.

4.

Remove two ECM attaching screws, then ECM.

5.

Reverse procedure to install. 

Main Relay (Computer/Fuel System) > < No Start or Hard Start/Engine Flooded When Cold|Page 1078