suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Intake Air Temperature Sensor > < Engine Temperature Sensor|Specifications|Page 881
Page 1
background image

Engine Temperature Sensor: Service and Repair

1.

Disconnect battery ground cable.

2.

Disconnect WTS connector.

3.

Remove WTS from intake manifold.

4.

Clean intake manifold and WTS mating surfaces.

5.

On all except Swift, install WTS with new gasket, torque to 25.5--39.5 ft. lbs.

6.

On Swift, install WTS with new gasket, torque to 14.5--21.5 ft.lbs. 

Intake Air Temperature Sensor > < Engine Temperature Sensor|Specifications|Page 881