Sidekick 4WD L4-1590cc 1.6L SOHC 0 TBI 8V (1990)
INSTALLATION
Assemble selector by reversing removal procedure, replacing parts with new ones as necessary. Apply grease to turning and sliding parts and check
them for smooth functioning.
Tightening Torque
(a) 20 Nm (14 ft. lbs.)
(b) 18 Nm (13 ft. lbs.)
NOTE:
-
When installing knob to select lever, position lever in N and turn knob 8-9 rotations inward, then fix it with screw.
Further, make sure that there is a slight clearance between detent pin and plate bottom when knob button is pushed in all the way.
-
Check it for proper operation as follows:
1. With knob button pushed half way, N to R and D to 2 shifts are available (but not any other shift).
2. With knob button pushed all the way in, 2 to L and R to P shifts are available.
-
Adjustment interlock cable.
-
Check that illumination light lights when lighting switch is turned ON.
