Sidekick 4WD L4-1590cc 1.6L SOHC 0 TBI 8V (1990)
1. Apply grease "A" to cable end hook and also joint pin before installing cable.
2. Position cable and hook cable end with clutch pedal shaft arm.
3. Joint inner cable end with joint pin (2) in release arm (3) and tighten outer cable nuts (4) around the center of outer cable thread portion.
Tightening Torque:
(a) 18 Nm (13.0 ft. lbs.)
(b) 50 Nm (36.0 ft. lbs.)
4. Screw in joint nut (1) and adjust free travel of pedal to specification by turning nut.
Free travel "a": 0.5 - 1.5 mm (0.02 - 0.06 inch)
5. Connect battery and check to make sure function of clutch with engine run.
