suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Rear Case|Page 1650 > < Case, M/T|Specifications
Page 1
background image

Case: Service and Repair
Rear Case

1. If oil seal leaks and/or its lip is excessively hardened, replace it with new one and at the same time, check main shaft where oil seal contacts. If

contacting surface is not smooth, correct or replace. Apply grease to oil seal lip portion.
Use Special Tool (A) 09913-75510.

2. If oil leakage exists at counter shaft end plug, replace it.

Use Special Tool (B) 09913-75520.

Rear Case|Page 1650 > < Case, M/T|Specifications