Sidekick 4WD L4-1590cc 1.6L SOHC 0 TBI 8V (1990)
7. Fit sleeve to reverse hub, place 3 synchronizer keys in it and then set synchronizer springs. Refer to figure for proper installing direction of hub,
sleeve and springs. Also, note that key has specific installing direction.
8. Set steel ball and bearing washer and insert reverse gear bush, needle bearing and reverse gear.
9. Press-fit reverse sleeve and hub assembly with Special Tool (B) 09925-18010 and press.
10. After setting large circlip, install 5th speed synchronizer ring, needle bearing, 5th gear, steel ball and washer.
NOTE: Washer should be installed with its oil slot side facing gear.
11. Press-fit bearing with Special Tool (B) 09925-18010 and press.
12. Fit small circlip.
