Sidekick 4WD L4-1590cc 1.6L SOHC 0 TBI 8V (1990)
3. With both reverse and high speed gear shift shafts placed at neutral position, insert low speed gear shift shaft into case and fix fork with spring pin.
Then apply sealant to rubber plugs and fit them in.
4. Confirm that interlock system operates properly by checking the following.
-
When shifted to low position (or 2nd position), shifting of 3rd/4th speed or 5th/Rev speed is not available.
-
When shifted to reverse position (or 5th position), shifting of 1st/2nd speed or 3rd/4th speed is not available.
5. Install locating balls and locating springs and then set washers and bolts.
Tightening Torque (a) 28 Nm (20.0 ft. lbs.)
