Sidekick JS 2D 2WD L4-1.6L (1998)
Wheels: Description and Operation
General Description
WHEELS: Standard equipment wheels are 15 x 5 1/2 JJ steel wheels.
WHEELS FOR REPLACEMENT
Wheels must be replaced if they are bent, dented, have excessive lateral or radial runout, leak air through welds, have elongated bolt holes, if lug
nuts won't stay tight, or if they are heavily rusted. Wheels with greater runout than shown in left figure may cause objectional vibrations.
Wheels for replacement must be equivalent to the originally equipped wheels in load capacity, diameter, rim width, off-set and mounting
configuration. A wheel of improper size or type may affect wheel and bearing life, brake cooling, speedometer/odometer calibration, ground
clearance to the body and chassis.