Sidekick JS 2D 2WD L4-1.6L (1998)
3. Apply thin coat of fuel to O-rings and then install injectors into delivery pipe and intake manifold.
Make sure that injectors rotate smoothly. If not, probable cause is incorrect installation of 0 ring. Replace 0 ring with new one.
4. Tighten delivery pipe bolts and make sure that injectors rotate smoothly.
Tightening Torque:
(a): 23 Nm (17 ft lb)
5. Install fuel pressure regulator.
6. Install clamp bolts for fuel feed pipe and return pipe.
7. Connect couplers to injectors securely.
8. Install air intake pipe and hose.
9. Connect battery negative cable.
10. With engine "OFF" and ignition switch "ON", check for fuel leaks around fuel line connection.