Sidekick JS 2D 2WD L4-1.6L (1998)
9. While turning wheel hub by hand, tighten wheel bearing lock nut to specified torque.
Special Tool (A): 09951-16050 or equivalent.
Tightening Torque (a): 210 Nm (152.0 ft. lbs.)
10. Using lock plate, lock bearing lock nut. If lock screw hole is not aligned with screw hole in lock nut, turn lock nut in tightening direction till they
align.
Tightening Torque (b): 1.5 Nm (13 inch lbs.)
11. Remove grease, old sealant and dusts from mating surfaces of hub cap and hub to clean, apply water tight sealant to cap mating surface evenly, and
install cap to hub.
"A": Sealant 99000-31090 or equivalent.
12. Install brake disc and caliper assembly.
Tightening Torque (c): 85 Nm (61.5 ft. lbs.)