Sidekick JS 2D Soft Top 2WD L4-1.6L (1997)
Special Tool
(A): 09912-58421
2) Connect special tools (hoses and attachment) to pipes of vehicle.
Special Tool
(B): 09912-58431
(C): 09919-46010
3) Connect special tool (test lead) to injector.
Special Tool
(D): 09930-88530
4) Install suitable vinyl tube onto injector nozzle to prevent fuel from splashing out when injecting.
5) Put graduated cylinder under injector as shown.
6) Disconnect coupler from fuel pump relay.
7) To operate fuel pump and apply fuel pressure to injector, using wire harness as thick as the one used for fuel pump circuit, connect
Black/White and Pink/Black wire harness terminals of fuel pump relay coupler.
8) Apply battery voltage to injector for 15 seconds and measure injected fuel volume with graduated cylinder.
Test each injector two or three times. If not within specification, replace injector.
Injected fuel volume:
39-49cc/15sec. (1.32/1.37 - 1.66/1.72 US/Imp. oz/15sec.)
9) Check fuel leakage from injector nozzle. Do not operate injector for this check (but fuel pump should be at work). If fuel leaks more than
following specifications, replace.
Fuel leakage: Less than 1 drop/min.