Sidekick JS 2D Soft Top 2WD L4-1.6L (1997)
Air Bag(s) Arming and Disarming: Service and Repair
Enabling Air Bag System
1. Turn ignition switch to "LOCK" and remove key.
2. Connect Yellow connector of passenger air bag (inflator) module and Yellow connector of driver air bag (inflator) module respectively, and be
sure to lock each connector with lock lever. Fit each air bag (inflator) module connector onto each connector stay.
3. Install glove box and steering wheel side cap.
4. Install "AIR BAG" fuse to the air bag fuse box.
5. Turn ignition switch to "ON" and verify that "AIR BAG" warning lamp flashes 7 times and then turns off. If it does not operate as described,
perform "Air Bag Diagnostic System Check".
