Sidekick JS 2D Soft Top 2WD L4-1.6L (1997)
Rear Knuckle: Service and Repair
REMOVAL
1. Hoist vehicle and remove wheel.
2. Remove wheel hub as previously outlined.
3. Support lower arm with jack.
4. Remove tie rod end.
Special Tool (A): 09913-65210 or equivalent.
5. Remove ball stud nut.
6. Remove strut bracket bolts from strut bracket.
7. By tapping knuckle on its end with hammer or using bearing puller, disconnect knuckle from ball stud.
8. While lowering jack, remove knuckle/wheel spindle comp.
9. Remove knuckle cap, dust cover and wheel spindle.
INSTALLATION
Reverse removal procedure noting the following.
