Sidekick JSS 4D Hard Top 2WD L4-1.8L (1997)
Wheel Speed Sensor: Service and Repair
Rear Wheel Speed Sensor
Removal
1) Disconnect negative cable from battery.
2) Hoist vehicle.
3) Disconnect rear wheel speed sensor connector and detach wire harness from vehicle body and rear axle.
4) Remove harness clamp bolts and remove rear wheel speed sensor from rear axle.
CAUTION:
-
Do not pull wire harness when removing rear wheel speed sensor.
-
Do not cause damage to surface of rear wheel speed sensor or pole piece and do not allow dust, etc. to enter its installation hole.
Installation