Sidekick JSS 4D Hard Top 2WD L4-1.8L (1997)
Acceleration/Deceleration Sensor: Service and Repair
Removal
1) Turn ignition switch "OFF" and disconnect battery negative cable.
2) Remove rear center console box.
3) Remove parking brake lever bolts (A) and G sensor with bracket from floor.
NOTE: Loosen only bolt (B).
4) Remove sensor with bracket from floor.
5) Disconnect connector from sensor.
CAUTION:
-
Do not separate sensor and bracket. It will lead to erroneous assembly.
-
Sensor must not be dropped or shocked. It will affect its original performance.