Sidekick JSS 4D Hard Top 2WD L4-1.8L (1997)
Air Filter Element: Service and Repair
AIR CLEANER ELEMENT
This air cleaner element is of dry type. Note that it needs aning according to the following method.
REMOVAL
1. Remove Intake Air Temperature (IAT) sensor from air cleaner upper case.
2. Remove air cleaner upper case.
3. Remove air cleaner element.
INSPECT
Check element for dirt.
CLEAN
Blow off dust by blowing compressed air from air outlet de of element (i.e., the side facing up when installed in air cleaner case).
INSTALLATION
1. Install element to air cleaner box.
2. Install air cleaner cap.
3. Install IAT sensor to air cleaner upper case.