Sidekick JSS 4D Hard Top 2WD L4-1.8L (1997)
10. Install pump body to pump cover as shown.
11. Tighten cover bolts to specified torque.
NOTE: After installing cover, check to make sure that shaft can be turned by hand.
Tightening Torque (a): 20 Nm (14.5 ft. lbs.)
12. Check that flow control valve slides smoothly and tighten discharge (delivery) connector to specified torque.
Tightening Torque (b): 55 Nm (40.0 ft. lbs.)
13. Tighten power steering pressure switch (terminal set) to specified torque.
Tightening Torque (c): 20 Nm (14.5 ft. lbs.)
14. Tighten suction connector bolts to specified torque.
Tightening Torque (d): 11 Nm (8.0 ft. lbs.)