Sidekick JSS 4D Hard Top 2WD L4-1.8L (1997)
Drive/Propeller Shaft: Service and Repair
REPLACEMENT
1. Hoist vehicle.
2. Drain transmission oil only when servicing front propeller shah
3. Before removing propeller shaft, give match marks on joint flange and propeller shaft as shown.
4. Remove propeller shaft.
5. Reverse procedure to install propeller shaft, noting the following:
-
When installing propeller shaft align the match marks. Otherwise, vibration may occur during driving.
-
Tighten universal joint flange to (a) 55 Nm (40.0 ft. lbs.)
NOTE: If transmission oil was drained for front propeller shaft removal, pour specified gear oil into transmission case to specified level.