Sidekick JX 4D Hard Top 4WD L4-1.6L (1997)
7) Remove ABS actuator assembly from vehicle.
8) Remove bracket from ABS actuator assembly.
INSTALLATION
Install Antilock Brake System (ABS) actuator assembly in reverse order of Removal procedure, noting the following points:
-
Torque all fasteners to specifications.
Tightening Torque
(a): 10 Nm (1.0 kg-m, 7.5 ft. lbs.)
(b):16 Nm (1.6 kg-m, 11.5 ft. lbs.)
-
After installing, bleed air from brake system.