Sidekick JX 4D Hard Top 4WD L4-1.6L (1997)
Color Painted: Green
Bearing Thickness: 1.996 - 2.000 mm (0.0786 - 0.0787 inch)
Color Painted: Black
Bearing Thickness: 1.999 - 2.003 mm (0.0787 - 0.0788 inch)
Color Painted: Colorless (no paint)
Bearing Thickness: 2.002 - 2.006 mm (0.0788 - 0.0789 inch)
Color Painted: Yellow
Bearing Thickness: 2.005 - 2.009 mm (0.0789 - 0.0790 inch)
Color Painted: Blue
Bearing Thickness: 2.008 - 2.012 mm (0.0790 - 0.0791 inch)
4. From numerals stamped on crank webs of No.2 and No.3 cylinders and the alphabets stamped on mating surface of cylinder block, determine new
standard bearing to be installed to journal, by referring to table given below. For example, if numeral stamped on crank web is "1" and alphabet
stamped on mating surface is "B",install a new standard bearing painted in "Black" to its journal.
Alphabet Stamped On Mating Surface (Bearing Cap Bore Diameter):
A:
1: Green
2: Black
3: Colorless
B:
1: Black
2: Colorless
3: Yellow
C:
1: Colorless
2: Yellow
3: Blue
New standard bearing to be installed.
5. Using gaging plastic, check bearing clearance with newly selected standard bearing. If clearance still exceeds its limit, use next thicker bearing and
recheck clearance.
6. When replacing crankshaft or cylinder block due to any reason, select new standard bearings to be installed by referring to numerals stamped on