Sidekick JX 4D Hard Top 4WD L4-1.6L (1997)
3. Ream valve guide bore with special tool (5.5 mm reamer). After reaming, clean bore.
Special Tool:
(A): 09916-34541 or equivalent
(B): 09916-34550 or equivalent
4. Install valve spring seat to cylinder head.
5. Install new valve stem seal to valve guide. After applying engine oil to seal and spindle of special tool (Valve guide installer handle), fit oil seal to
spindle, and then install seal to valve guide by pushing special tool by hand. After installing, check to be sure that seal is properly fixed to valve
guide.
Special Tool:
(A): 09917-98221 or equivalent
(B): 09916-58210 or equivalent
NOTE:
^
Do not reuse seal once disassembled. Be sure to install new seal.
^
When installing, never tap or hit special tool with a hammer or else. Install seal to guide only by pushing special tool by hand. Tapping or
hitting special tool may cause damage to seal.
6. Install valve to valve guide. Before installing valve to valve guide, apply engine oil to stem seal, valve guide bore, and valve stem.
