Sidekick JX 4D Hard Top 4WD L4-1.6L (1997)
Brake Light Switch: Adjustments
CLEARANCE "B"
Adjustment should be made as follows when installing switch.
^
Pull up on brake pedal and while holding it there, adjust switch position so that clearance between end of thread and brake pedal return cushion
(shown as "a" in figure). Clearance "b" is 1.5 - 2.0 mm (0.06 - 0.08 inch.)
^
Then tighten lock nut (b) to 7.5 Nm (5.5 ft. lbs.)