Sidekick JX 4D Hard Top 4WD L4-1.6L (1997)
Catalytic Converter: Technical Service Bulletins
Catalytic Converter - Vibration Noise
TSB No. 4-27 04117
Section Tile: Engine
Division: Automotive
Category: Technical
SUBJECT:
VIBRATION NOISE AT 2100-2300 RPM
MODEL:
SPORT
YEAR:
1996-97
CONDITION:
Vibration noise at 2100-2300 RPM from the catalytic converter.
CAUSE:
Engine resonance causing catalytic converter heat shield to vibrate against the catalytic converter housing.
CORRECTION:
Replace the heat shield and M.I.G. or T.I.G. weld a vibration dampener to the catalytic converter outlet pipe.
In some 1996-97 Suzuki Sport vehicles, engine resonance may cause the catalytic converter heat shield to vibrate. To reduce the vibration noise between
2100-2300 rpm, please follow the procedures outlined in this bulletin.
WARNING:
To avoid the danger of being burned, do not touch the exhaust system when the system is hot. Any service on the exhaust system should be
performed when the system is cool.
Vibration Damper Installation
To perform the repairs, you will need these countermeasure parts as shown.
INSTALLATION INSTRUCTIONS