Sidekick JX 4D Hard Top 4WD L4-1.6L (1997)
If resistance is as specified, proceed to step 6). If not, replace.
6) Disconnect vacuum hoses from EVAP canister.
7) With coupler disconnected, blow into hose "A". Air should come out of hose "B".
If not, replace EVAP canister air valve.
8) Connect 12V-battery to EVAP canister air valve terminals. In this state, blow hose "A".
Air should come out hose "B".
WARNING:
Do not suck the air through valve. Fuel vapor inside valve is harmful.
If check result is specified above, check EVAP canister air valve harness.
If not, replace EVAP canister air valve.
9) Connect vacuum hose.
10) Connect EVAP canister air valve coupler securely.