Sidekick JX 4D Hard Top 4WD L4-1.6L (1997)
Wheel Speed Sensor: Service and Repair
Front Speed Sensor Ring/Rotor
Installation
1) Install sensor rotor as shown.
NOTE:
-
Pipe used here should have inner diameter of 98-104 mm (3.86-4.09 inch) and its outside should not contact teeth of sensor rotor.
-
Use care not to insert wheel hub diagonally.
2) Install wheel hub, brake disc, brake caliper, locking hub and wheel.
Removal
1) Remove wheel hub with sensor rotor.
2) Remove sensor rotor from wheel hub as shown.
CAUTION: Pull sensor rotor out from wheel hub gradually and evenly. Attempting to pull it out partially Deform it.