Sidekick JX 4D Hard Top 4WD L4-1.6L (1997)
21. Install wheel and tighten wheel nuts to specified torque.
Tightening Torque (g): 95 Nm (69.0 ft. lbs.)
22. Upon completion of all jobs, depress brake pedal with about 30 kg (66 lbs) load three to five times so as to obtain proper drum-to-shoe clearance.
Adjust parking brake cable. Refer to Brakes and Traction Control.
23. Tighten parking brake lever cover screws.
24. Lower hoist.
25. Tighten right and left trailing rod nuts and shock absorber nuts to specified torque.
NOTE: When tightening these nuts, be sure that vehicle is off hoist and in non loaded condition.
Tightening Torque:
(h): 90 Nm (65.0 ft. lbs.)
(i): 85 Nm (61.5 ft. lbs.)
26. Check to ensure that brake drum is free from dragging and proper braking is obtained.
27. Perform brake test (foot brake and parking brake).
28. Check each installed part for oil leakage.
