Sidekick JX 4D Hard Top 4WD L4-1.6L (1997)
9. After applying grease "A", install select guide pins, select return springs end spring bolts and torque them to specification.
"A": Grease 99000-25010
Tightening Torque
(a): 23 Nm (2.3 kg-m, 17.0 ft. lbs.)
NOTE: Double coil spring is required at 5th/Reverse select side.
10. Clean mating surfaces of both case plate and case, apply sealant "B" to case side evenly, mate them and fasten with screws.
"B": Sealant 99000-31110
Tightening Torque
(b): 9 Nm (0.9 kg-m, 6.5 ft. lbs.)
11. If reverse gear shift limit bolt has been removed, apply thread lock cement "C" then install and torque it to specification.
"C": Thread lock cement 99000-32020
Tightening Torque for limit bolt
(c): 32 Nm (3.2 kg-m, 23.0 ft. lbs.)