Sidekick JX 4D Hard Top 4WD L4-1.6L (1997)
2. Function of back up light switch can be checked also at terminal 3 and 4 in coupler.
-
There should be conduction at these terminals only when shift lever is shifted to reverse position.
3. Function of transfer 4WD switch can be checked at terminal 2 and 5 in this coupler.
-
There should be conduction at these terminals when shift lever is shifted to 4H, and 4L positions.
4. Upon completion of check, connect coupler and clamp wiring harness as they were.
NOTE: When replacing switch(es), use care not to let dust enter transmission through switch hole(s).
