Sidekick Sport 2D JLX 4WD L4-1.8L (1998)
Wheel Speed Sensor: Service and Repair
Front Speed Sensor Ring/Rotor
Installation
1) Install sensor rotor as shown.
NOTE:
-
Pipe used here should have inner diameter of 98 mm (3.86 inch) -104 mm (4.09 inch) and its outside should not contact teeth of sensor rotor.
-
Use care not to insert wheel hub diagonally.
2) Install wheel hub, brake disc, brake caliper, locking hub and wheel.
Removal
1) Remove wheel hub with sensor rotor.
2) Remove sensor rotor from wheel hub as shown.
CAUTION: Pull out sensor rotor from wheel hub gradually and evenly.
Attempt to pull it out partially may cause it to be deformed.