Sidekick Sport 2D JLX 4WD L4-1.8L (1998)
6. Remove throttle cover.
7. Disconnect accelerator cable and A/T throttle cable (For A/T vehicle) from throttle body.
8. Disconnect following electric lead wires:
-
EGR valve
-
Idle Air Control (IAC) valve
-
Throttle Position (TP) sensor
-
Mass Air Flow (MAF) sensor
-
EVAP canister purge valve
-
Ground terminal from intake manifold
-
EVAP diagnostic valve (if equipped)
9. Disconnect following hoses:
-
Brake booster hose from intake manifold
-
PCV hose from PCV valve
-
Fuel pressure regulator vacuum hose from intake manifold
-
Manifold Differential Pressure (MDP) sensor hose from intake manifold
-
Canister purge hose from EVAP canister
-
Water hoses from throttle body and water bypass pipe
-
Breather hose from throttle body
10. Remove throttle body from intake manifold