Sidekick Sport 2D JLX 4WD L4-1.8L (1998)
Timing Chain Tensioner: Service and Repair
2nd Timing Chain and Chain Tensioner
INSTALLATION
1. Check that crank timing sprocket key is in match with timing mark on cylinder block as shown in figure.
2. Check that arrow mark on idler sprocket faces upward as shown in figure.
3. Check that knock pins of intake and exhaust camshafts are aligned with timing marks on cylinder head as shown in figure.
4. Install 2nd timing chain by aligning yellow plate of 2nd timing chain and match marks on idler sprocket.
5. Install sprockets to intake and exhaust camshafts by aligning dark blue plate of 2nd timing chain, match marks on intake sprocket and exhaust
sprocket respectively.