Sidekick Sport 2D JLX 4WD L4-1.8L (1998)
7. Install generator belt tensioner. Tighten bolts to specified torque.
Tightening Torque (a): 25 Nm (18.5 ft. lbs.)
8. Install cooling fan belt, fan pulley and cooling fan.
9. Install water pump pulley.
10. Install generator belt by turning generator belt tensioner center bolt clockwise to loosen tension of generator belt.
11. Install bypass pipe and water bypass hose No.2. Tighten bolts to specified torque.
Tightening Torque (b): 23 Nm (17.0 ft. lbs.)
12. Install cylinder head cover. Refer to item CYLINDER HEAD COVER for installation.
13. Install oil pan and oil pump strainer. Refer to item OIL PAN AND OIL PUMP STRAINER for installation.
14. Adjust cooling fan belt tension.
15. Refill cooling system with coolant, front differential with gear oil and engine with engine oil.
16. Verify that there is no water leakage, oil leakage and exhaust gas leakage at each connection.
17. Check wheel alignment.
